ZH-974D1 3-level Temperature Control Motorcycle Hook and Loop Fastener Intelligent Heated Grip

1. Using Kevlar material, heat generation faster, heat more evenly, after 8000 times abrasion test successfully, it is more durable.
2. The switch has a built-in intelligent temperature control chip, three levels of temperature adjustment, intelligent temperature control is more convenient, and can be adjusted to the corresponding temperature according to personal preference.
3. The use of large heating film, large heating area, fast heating speed, 10 seconds rapid heating, so that your hands are no longer cold in the cold winter.
4. The heating piece is fixed by hook and loopfastener, which is convenient and quick to install, does not damage the handlebars, and is beautiful and generous.
5. With IP67 water-resistant rating, it can work normally even if the switch and the handle cover are soaked in water. When the handle cover needs to be cleaned, just unplug the plug and it can be washed with water, which is very convenient
6. It can be directly plugged into the USB port, and it can be powered on when plugged in. No wiring is required, which is more convenient to use.
7. Operating instructions:
Working status: indicator light is always on (first gear: red always on, second gear: green always on, third gear: blue always on)
Click on the key: switch gears and switch the machine
8. Voltage: DC 5V
9. Size + wire length: heating film: length 12.8cm, width 10cm; heating film to the switch length 104CM
10. Working temperature: -30°C~70°C
11. Temperature control value]: first gear (red): 70 degrees Celsius; second gear (green): 60 degrees Celsius; third gear (blue): 50 degrees Celsius (the above data are all obtained from experiments, the specific values ??may be due to voltage and environment Changes in objective factors such as those appear to fluctuate slightly, for reference only)

Attention:
1. Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, when the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns.
2. This product can be used with the USB charging port on the car. Before installation, you can test whether the product is normally energized.
3. It is strictly forbidden to energize and work when not riding (empty burn) to prevent the electric handle cover from overheating and damaging the original handlebar.